PLS NEW PLS5 Manuel D'utilisation page 83

Rechtwinkeligkeit
To establish square, place the PLS with the #2 down beam over the layout reference line. See Fig.
5
7. Place the pendulum target on that line, and center #1 forward beam on the center of the target.
Once centered, move the pendulum target to square on #4 left beam or #5 right beam. Make a
mark on the floor or surface near the laser and the second mark at the desired distance from the
laser. See Fig. 7.
STRAHL 5
C L
STRAHL 1
MARKIERUNG
ABB. 7
C L
REFERENZLINIE
MARKIERUNG
8