Safety Labeling & Instructions - PLS NEW PLS5 Manuel D'utilisation

Safety Labeling & Instructions
PLS5 SIDE
APERTURE LABEL
AVOID EXPOSURE
LASER RADIATION EMITTED
FROM THIS APERTURE
5 3
PLS and PLS comply with
US FDA performance standards,
21 CFR, Subchapter J.
5 3
The PLS and PLS contain
a semiconductor laser diode
with a wavelength of 635 nanometers.
The continuous output of any single beam never exceeds 1.0 milliwatts.
Never stare directly into the laser beam or view the beam with optical
instruments. Turn the laser off when not in use.
CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
These labels are attached to every PLS laser. These are not to be removed or defaced.
PLS5 BACK
ID# CERTIFICATION LABEL
GLOBALLY SOURCED. FINAL ASSEMBLY IN U.S.A.
PATENT #6,938,360 1-800-601-4600
PLS 2550 KERNER BLVD., SAN RAFAEL, CA 94901
S/N: DATE:
CLASS 2 LASER PRODUCT
PLS COMPLIES WITH FDA STDS. 21. CFR.,
5
CHAP. J 1040.10 & 11 EXCEPT FOR DEVIATION
PURSUANT TO LASER NOTICE .60 OF 7/26/2006
REGISTERED U.S. PATENT OFFICE.
WARNING LABEL
C A U T I O N
LASER RADIATION
DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS
MAX OUTPUT POWER <1mW
WAVELENGTH 635-670nm
CLASS 2 LASER PRODUCT
ID# CERTIFICATION LABEL
GLOBALLY SOURCED. FINAL ASSEMBLY IN U.S.A.
PATENT #6,938,360
PLS 2550 KERNER BLVD., SAN RAFAEL, CA 94901
S/N:
CLASS 2 LASER PRODUCT
PLS COMPLIES WITH FDA STDS. 21. CFR.,
3
CHAP. J 1040.10 & 11 EXCEPT FOR DEVIATION
PURSUANT TO LASER NOTICE .60 OF 7/26/2006
PLS3 TOP
1-800-601-4600
DATE:
4