Epg - Electronic Programme Guide; Universal Functions ("Punch Through") - Medion MD 81035 Mode D'emploi

2. Use the number buttons to enter a number between 01
and 99. Always prefix single digit numbers with a "0".
The source key will go out.
3. Lay the universal remote control down so that it is poin
ting towards the television and is not obstructed.
The device will be switched off after the programmed
period.
Cancel function
You can cancel the sleep timer by carrying out the following:
Enter Setup mode (press and hold the SETUP button
for three seconds).
Press SLEEP once.
EPG – Electronic Programme Guide
The EPG ("Electronic Program Guide") button has various
functions, depending on which code has been used:
For TV and satellite codes (e.g. SAT-TV or DVB-T) the button
calls up the electronic programme guide.
For DVD codes the button opens the title menu.
For VCR codes you can use the button for programming, if
your video recorder has a Showview / Videoplus function.

Universal functions ("Punch Through")

The universal functions (also called "Punch Through"
functions) enable you to carry out certain functions on a dif
ferent device type than the programmed one. These are the
volume, mute and playback functions.
If the remote control is in VCR, DVD, SAT or CBL mode,
the volume and mute keys (
vided the other devices do not have their own volume
control);
if the remote control is in TV mode or in another mode wi
thout playback function, the PLAY, STOP, PAUSE, FAST
FORWARD/BACK, SKIP keys and perhaps RECORD will
actuate a connected video recorder, DVD player or DVD
recorder. The last selected device is actuated.
Programming the volume/mute universal functions
to another device type
In its delivered state, the universal remote control is pro
grammed in such a way that the volume and mute functions
automatically control the TV set if a source key for a device
with image transmission (DVD, video recorder) is pressed.
You can program the universal remote control so that the
universal functions Volume and Mute will actuate another
device type than the TV set.
1. Keep the SETUP key pressed down for approx. 3
seconds until the background lighting of the source key
will flash for a short time and then remain permanently
lit.
2. Press the
briefly.
3. Press a source key for the device to which the volume
and mute functions should be transferred to. The light
for this source key will remain lit.
4. Press the
you accidentally selected a device that does not have
its own volume control, the source key will flash for 3
seconds.
key, until the source key extinguishes
key; the source key light will extinguish. If
11
) control the TV set (pro
UK