Preparing For Use; Attaching The Brush Head - Philips sonicare elite e7000 Mode D'emploi

Supervise children when they are brushing until they have
established good brushing habits.
If your toothpaste contains peroxide, baking soda or bicarbonate
(common in whitening toothpastes), thoroughly clean the brush
head with soap and water after each use.
Do not use the charger outdoors.

Preparing for use

C
1 Store excess cord by winding it round the cord storage hooks
in the bottom of the charger.

Attaching the brush head

C
1 Align the front of the brush head with the front of the
toothbrush handle. Match the bars on the brush head with the
notches inside the top of the handle and slide the brush head
onto the handle.
C
2 Screw the brush head nut clockwise until it is firmly tightened.
If the brush head rattles during use, tighten the nut further.
3 Remove the travel cap from the brush head before you start
brushing.
Charging
Charge the Sonicare for at least 24 hours during the first few days of
use.
We advise you to keep the Sonicare in the plugged-in charger when
not in use to maintain a full battery charge.When the battery is empty,
it takes at least 24 hours to fully charge the Sonicare.
C
1 Make sure the bottom of the handle sits back securely in the
charger, making complete contact.
ENGLISH
5