Philips sonicare elite e7000 Mode D'emploi page 11

C
2 Clean the brush head at least once a week, including under the
nut.
C
3 Remove the nut by gently pressing on the rubber seal.
Avoid using sharp objects to press on the seal as this may cause
damage.
C
Pull the nut over the top of the brush head.
4 To reattach the nut, slip the nut over the brush head shaft and
pull it down until it snaps home.
C
5 Clean the handle weekly.
6 Clean the charger periodically.
Unplug the charger before cleaning it. After cleaning the charger, dry it
completely before putting the plug back into the wall socket.
We advise you to use a mild cleaning agent, water and a moist cloth to
clean the Sonicare.
Storage
1 If the appliance is not going to be used for a long time, you
should unplug it, clean it and store in a cool and dry place away
from direct sunlight.You can store the cord by winding it round
the cord storage hooks in the bottom of the charger.
ENGLISH
11