Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Required
Ratchet with a ¼" socket
or open-ended wrench
(leveling legs)
Ratchet with a ⁹⁄₁₆"
(14 mm) socket or open-
ended wrench (for
leveling leg locknuts and
attachment bolts)
Parts Supplied
Remove the parts package from pedestal carton. This package
contains 4 bolts and a drawer shelf. Check that all parts are
included.
2
PEDESTAL SAFETY
Your safety and the safety of others are very important.
INSTALLATION REQUIREMENTS
Utility knife
Pliers or slip-joint pliers
(for drain and inlet hoses)
Level
Bucket
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Location Requirements
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Place dryer at least 18 inches (46 cm) above the floor
for a garage installation.
Failure to do so can result in death, explosion, or fire.
NOTE: If dryer and pedestal assembly is located in a garage,
6" (15.2 cm) must be added under pedestal so that dryer is
18" (45.7 cm) above garage floor.
Before Installing Your Pedestal
IMPORTANT: If your washer and dryer are already installed, they
must be uninstalled.
If you need to uninstall your washer or dryer, see the Installation
Instructions that came with your model for tools required.
Publicité
Table des Matières
