Technical Specifications - livin flame Brighton Instructions De Montage Et D'utilisation

Do not use this fire in rooms that have explosive gas in them (for example petrol), or if you are using

solvents, glue, aerosol spray or in flammable paints, as these may catch fire.
Cleaning and user maintenance shall not be made by children without supervision.

1.2

Technical specifications

Model no..............................................Brighton EM202C
Supply Voltage ....................................220-240 V AC, 50 Hz
Maximum power consumption..........2000 Watts
Power for flame effect........................6,4W (LED 2,4W + motor for flame 4W)
Heat Output:
Nominal heat output (Pnom) ......................................................... 2KW
Minimum heat output(indicative) (Pmin) .....................................1KW
Maximum continuous heat output (Pmax)................................... 2KW
Auxiliary Electricity Consumption:
At nominal heat output (elmax)...................................................... 12.5W
At minimum heat output (elmin).................................................... 12.0W
In standby mode (elSB)...................................................................... 0.48W
Type of heat output / room temperature control
Single stage heat output and no room temperature control
Two or more manual stages, no room temperature control
With mechanic thermostat room temperature control
With electronic room temperature control
Electronic room temperature control plus day timer
Electronic room temperature control plus week timer
Other Control Options
Room temperature control, with presence detection
Room temperature control, with open window detection
With distance control option
With adaptive start control
With working time limitation
With black bulb sensor
No
No
No
Yes
Yes
Yes
No
Yes
No
Yes
No
No
14