Modes Of Operation; Thermostatic Mode; Program Mode; Temperature Setting - Element4 E-Save Manuel D'installation

moDES of opERaTIoN

Thermostatic mode

The room temperature is measured and
AM
compared to the set temperature. The
PM
flame height is then automatically ad-
ON
OFF
justed to achieve the set temperature.
1 2

program mode

PROGRAMS 1 and 2, each can be pro-
AM
PM grammed to go on and off at specific
times at a set temperature.
ON
OFF
1 2
Eco mode
Flame height modulates between high
AM
and low. If the room temperature is low-
er than the set temperature, the flame
height stays on high for a longer period
of time. If the room temperature is high-
er than the set temperature, the flame
height stays on low for a longer period
of time. One cycle lasts approx. 20 min.
ThERmoSTaTIc moDE
ON:
Press
AM
PM perature displayed briefly, and then room
temperature displayed.
ON
OFF
1 2
OFF:
1. Press
2. Press
Mode.
3. Press
4. Press
SETTING:
1. Press
AM
PM played, temperature flashes.
2. To adjust set temperature press
ON
OFF
1 2
3. To confirm press
button. displayed, preset tem-
button.
or button to enter Manual
button to enter Program Mode.
button to enter Eco Mode.
button and hold until
button.
button or wait.
pRogRam moDE
AM
PM
ON
OFF
1 2
AM
PM
ON
OFF
1 2
NoTE: The set temperature for Thermostatic Mode is the tem-
perature for the on time in Program Mode. Changing the
Thermostatic Mode set temperature also changes the
on time temperature in Program Mode.
Default settings:
ON TIME (Thermostatic) TEMPERATURE: 21 °C (70 °F)
OFF TIME TEMPERATURE: "
AM
PM
ON
OFF
1 2
NoTE: The on (Thermostatic) and off set temperatures are the
same for each day.
AM
dis-
PM
ON
OFF
or
1 2
39
ON:
Press button. , or ,
displayed.
OFF:
1. Press or or button to enter
Manual Mode.
2. Press button to enter Thermostatic
Mode.
" (pilot flame only)

TEMPERATURE SETTING:

1. Press button and hold until
flashes. and set temperature (set-
ting in Thermostatic Mode) displayed.
2. To continue press button or wait.
, displayed, temperature flash-
es.
3. Select off temperature by pressing
the or button.
4. To confirm press button.
DAy SETTING:
5. flashes. Press or
choose between ,
, , .
6. To confirm press button.
UK
or
button to
, , , , ,