Ec Declaration Of Conformity - Chicago Pneumatic CP8748 Serie Manuel De L'opérateur

English
INSTRUCTION MANUAL
This product is designed for installing and removing threaded
fasteners in wood, metal and plastic. No other use permitted. For
professional use only.
Operation
The intended use of this impact wrench is with impact rated sockets
operating upon threaded fasteners. To operate, pull trigger on
handle. The tool is fitted with a progressive throttle action, this allows
a low speed with a small throttle opening.
1. Insert battery pack
2. Remove battery pack
Charger Operation Manual
CP8000 battery charger product is designed subject for CP battery
pack. No other use permitted. For professional use only.
Charger Instruction
Charging 100 V-240 VAC
Charging 0-25 %
Charging 25-50 %
Charging 50-75 %
Charging 75-100 %
Temperature over heat
Charger will stay stand by till
battery temperature cool
down
Ni-Cd 0 °-40 °
Li-ion 0 °-50 °
Refresh battery (for Ni-Cd
only). Push 3s. Refreshing
process takes 24h.
Refresh finish (for Ni-Cd
only)
Contact CP service centre if Alarm: Bi 20 times
Contact CP service centre if
© Copyright 2007, CP
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks,
model denominations, part numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized
parts is not covered by Warranty or Product Liability.
Alarm: Bi once
Alarm: Bi 5 times
Alarm: Bi 2 times
Alarm: Bi once
Alarm: Bi 5 times
According to Directive 2002/96/CE concerning Waste Electrical and
Electronic Equipment (WEEE), this product must be recycled.
Please contact your "Customer Centre" or consult the website
"www.cp.com" to find out where you can recycle this product.

EC DECLARATION OF CONFORMITY

We, Chicago Pneumatic Tool Company, 1800 Overview Drive, Rock
Hill, SC 29730 USA, declare under our sole responsibility that the
product to which this declaration relates, is in conformity with the
requirements of the law of Member States relating 98/37/EC
(Machinery), 73/23/EEC (Low Voltage), 93/68/EC (Council), 89/336/
EEC(EMC), 92/31/EEC (EMC), 2002/95/EC (RoHS), 2002/96/EC
(WEEE), Class II.
Machine Name CP8748 Cordless Impact Wrench
Machine Type Assembly Power Tool for Threaded Fasteners - No
other use is permitted.
Serial No. Tools with No. 01A0001-2007
Technical Data
1/2" (12.25 mm) Sq. Dr. Std.
Voltage: 19.2 V (Ni-Cd) 1.7 Ah
18 V (Li-ion) 2.4 Ah
Free speed: 2000 rpm
Torque max: 425 ft-lbs (575 Nm)
Charger
Input/Voltage = 100-240 VAC
Output/Voltage = 7.2 V - 19.2 V
Mass = 3.2 Kg (Ni-Cd), 2.95 Kg (Li-ion)
Harmonized Standards Applied EN60745-2-2
National Standards Applied
EN61000-3-2, EN61000-3-3, EN61000-6-2,
EN61000-6-4, EN55014-1, EN55014-2,
EN60335-2-29, EN60335-1, EN50366, UL1310
Name And Position Of Issuer
Bruno Blanchet, General Manager,
CP TechnoCenter, Nantes, France
Signature Of Issuer
Place And Date Of Issue Saint-Herblain, 44800 FRANCE,
03, 2012
Noise & Vibration Declaration*
Sound pressure level 91 dB(A) impacting, 77 dB(A) free speed, in
accordance with ISO 15744-2002. For sound power, add 11 dB(A).
2
Vibration value 8.7 m/s , K=2.6, re. ISO 28927-2.
*These declared values were obtained by laboratory type testing in
compliance with the stated standards and are not adequate for use
in risk assessments. Values measured in individual work places may
be higher than the declared values. The actual exposure values and
risk of harm experienced by an individual user are unique and
depend upon the way the user works, the workpiece and the
workstation design, as well as upon the exposure time and the
physical condition of the user. We, Chicago Pneumatic, cannot be
held liable for the consequences of using the declared values,
instead of values reflecting the actual exposure, in an individual risk
assessment in a work place situation over which we have no control.
CP8748 Series
Cordless Impact Wrench