Parts Location; Specifications - Timberpro HT260 Mode D'emploi

1. Parts location

1. Front handle
2. Rear handle
3. Stop switch
4. Throttle trigger
5. Safety lock
6. Blades
7. Blade guard
2. Specification
Model ..................................................................................................................HT260
T ype ................................................................................................ double-action type
Blade length (from the tip of Gear Case)...........................................................600 mm
Engine
Model .............................................................................................................1E34F
Displacement ........................................................................................... 25.4 cm
Carburetor .................................................................................... Diaphragm type
Ignition system ..................................................... I.C.controlled flywheel magneto
Spark plug ............................................................................................... LD BM6A
Fuel ............................................................................. mixture (Gasoline 40 : Oil 1)
Fuel tank capacity ................................................................................................. 0,6 L
Starter ...................................................................................................... Recoil starter
Clutch .................................................................................................. Centrifugal type
Dry weight............................................................................................................6,0 kg
Specifications are subject to change without notice.
19
8. Gear case
9. Starter knob
10. Fuel tank
11. Fuel cap
12. Choke lever
13. Air cleaner cover
14. Spark plug cap
GB 2
15. Blade cover
16. Operator's manual
17. Socket
18. Allen key
19. Locking lever
3