Storage; Disposal; Troubleshooting Guide - Timberpro HT260 Mode D'emploi

9. Storage

1. Oil the blade to prevent rust.
2. Empty the fuel tank and put the cap back on.
3. Remove the spark plug, pour a small amount of oil
into the cylinder.
4. Rotate the crankshaft several times using the start-
ing rope in order to distribute the oil. Put the spark
plug back in.
5. Wrap the engine with a plastic sheet.
6. Store the trimmer indoors in a dry place, dust free
place, out of the reach of children, preferably not in
direct contact with the floor and away from heat
sources.

11. Troubleshooting guide

Case 1. Starting failure
CHECK
fuel tank
fuel filter
carburetor adjustment screw
sparking (no spark)
spark plug
Case 2. Engine starts but does not keep running/hard re-starting
CHECK
fuel tank
carburetor adjustment screw
muffler, cylinder (exhaust port) A carbon is built-up
air cleaner
cylinder fin, fan cover
When your unit seems to need further service, please consult with our service shop in your area.
PROBABLE CAUSES
A incorrect fuel
A fuel filter is clogged
A out of normal range
A spark plug is fouled/wet
A plug gap is incorrect
A disconnected
PROBABLE CAUSES
A incorrect fuel or staled fuel A drain it and use correct fuel
A out of normal range
A clogged with dust
A clogged with dust
GB 14

10. Disposal

• When you dispose of the machine, do not disassemble
the machine.
• When you dispose of the machine fuel oil, be sure to
follow your local regulations.
ACTION
A drain it and use correct fuel
A clean
A adjust to normal range
A clean/dry
A correct (GAP: 0.6 ~ 0.7 mm)
A retighten
ACTION
A adjust to normal range
A consult with the repair specialty store
A wash
A consult with the repair specialty store
G
B