Reinstall The Cover; Hose Installation - Beyond LAUNDRY PRO 2.0 Manuel De L'utilisateur

REINSTALL THE COVER

1 . Return the Laundry Pro 2 .0 cover to its original position, fitting the bottom in
place and tipping upward .
2 . Secure with two (2) screws (not shown) along the top edge .
3 . Put the two (2) remaining screws along the bottom edge and tighten .
NOTE:
Remove the two black caps from the hose connections
before installing hoses .

HOSE INSTALLATION

NOTE:
To ease hose installation and prevent cross threading, connect hose
prior to mounting unit on wall .
1 . Turn the cold water off by shutting off the cold water faucet .
2 . Remove the cold water hose from the cold water inlet on the back of
your washing machine . Leave hot water hose attached .
NOTE:
To help prevent water spray when disconnecting hoses, you can relieve
pressure in the water line by momentarily starting your washing machine .
CAUTION:
When connecting hoses to your Laundry Pro 2 .0 start by hand tightening the hose
connector(s) . Using adjustable pliers, finish tightening hose connector(s) . Do not
remove or disconnect the hot water line from your washing machine or water valve .
Screws
Screws
7