Before You Start; Removing Cover - Beyond LAUNDRY PRO 2.0 Manuel De L'utilisateur

BEFORE YOU START

NOTE:
Your Laundry Pro 2 .0 unit was factory tested . It is normal for some residual water to still remain in the unit as a result of these tests .
• Remove your new Laundry Pro 2 .0 from its packaging .
• Inspect the unit for any signs of shipping damage .

REMOVING COVER

1 . Remove the two (2) cover screws located on
the bottom of the unit .
2 . Remove the two (2) screws (not shown) along
the top of the Laundry Pro 2 .0 .
3 . To remove the cover, pull the top away from the
unit, then lift off the cover .
Screws
5