Brandson Equipment 303451 Mode D'emploi page 42

5. Inserting / replacing the battery
To replace the battery, slide it over the guide rail (2) until it clicks into
place. Unlock the battery by pressing the "Battery unlocking" button (1)
and then slide the battery out of the device (2) for removing the battery.
6. Charging the battery
Charge the battery using the charging station provided. A status LED is
located on the charging station. As long as the LED is red, then charg-
ing is in progress. When the LED turns green, the battery is then fully
charged and can be reused.
There is a charging level indicator on the battery itself. Press the button
shown in the figure below.
42
English