Safety Features - Danby DBSH02213WD13 Manuel Du Propriétaire

OPERATING INSTRUCTIONS

SAFETY FEATURES

Tip Over Safety Feature
This heater is equipped with a shut-off safety
feature. If the heater is tipped over, an internal
switch will automatically shut the heater off. When
the heater is returned to an upright position, the
heater will reset. To continue operation, turn on
the heater using the supplied remote control or the
control panel on the heater.
Overheat Safety Feature
This heater is equipped with an overheat safety
feature. When the heater's internal components
reach a certain temperature that could cause
overheating and possible fi re, the heater will
automatically shut off.
A thermal overload protector is built in to prevent
overheating. When an "overheat" temperature
is reached, the heater will automatically shut off.
Operation can only resume when the user resets the
heater.
To reset the heater, ensure the power is turned off,
unplug the unit and wait 15 to 20 minutes for the
internal components to cool down.
Follow the instructions for use to return the heater to
normal functioning.
WARNING: It is normal for the power cord to feel
warm to the touch; however, a loose fi t between
the outlet and the plug may cause overheating of
the plug. If this occurs, try inserting the plug into
a different outlet. Contact a qualifi ed electrician to
inspect the original outlet for damage.
FEATURES
1. Control panel
2. Air outlet
3. Power switch
4. Handle
5. Air intake
6. Tip over safety switch (on bottom)
7. Remote control (not pictured)
1
2
3
3
4
5
6