Safety Features - Danby DBSH01113WD13 Manuel Du Propriétaire

SAFETY FEATURES

Tip Over Safety Feature
This heater is equipped with a shut-off safety feature. If the heater is
tipped over, an internal switch will automatically shut the heater off.
When the heater is returned to an upright position, the heater will
reset. To continue operation, turn on the heater using the supplied
remote control or the control panel on the heater.
Overheat Safety Feature
This heater is equipped with an overheat safety feature. When the
heater's internal components reach a certain temperature that could
cause overheating and possible fi re, the heater will automatically
shut off.
A thermal overload protector is built in to prevent overheating.
When an "overheat" temperature is reached, the heater will
automatically shut off. Operation can only resume when the user
resets the heater.
To reset the heater, ensure the power is turned off, unplug the unit
and wait 15 to 20 minutes for the internal components to cool down.
Follow the instructions for use to return the heater to normal
functioning.
WARNING: It is normal for the power cord to feel warm to the
touch; however, a loose fi t between the outlet and the plug may
cause overheating of the plug. If this occurs, try inserting the plug
into a different outlet. Contact a qualifi ed electrician to inspect the
original outlet for damage.
4