4. Start-up and operation
4.1.Connecting the charging station
and devices
• Connect the Type A USB plug to a free
USB port on your PS5.
• Place your Sony DualSense5 controller(s)
in the charging tray(s) (A/B) on the
charging station.
• When the charging process is active, the
controller LED display on the charging
station lights up red.
• The charging process is complete when
the controller LED display lights up blue.
Note
If the power consumption of all connected
devices exceeds the maximum power
(see 7. Technical data) of the product,
the devices may charge more slowly or
not at all.
5. Warranty disclaimer
Hama GmbH & Co. KG assumes no liability
and provides no warranty for damage
resulting from improper installation,
mounting and improper use of the product
or from failure to observe the operating
instructions and/or safety notes.
6. Service and Support
Please contact Hama Product Consulting if
you have any questions about this product.
Hotline: +49 9091 502-115 (German/
English)
Further support information can be found
here: www.hama.com
7. Technical data
Charging
IN / OUT: 5.0 V
Station
1.22 A
8. Recycling information
Note on environmental protection:
Following the implementation
of European Directive 2012/19/
EU and 2006/66/EU into the
national legal systems, the
following applies:
Electrical and electronic devices as well
as batteries must not be disposed of with
household waste. Consumers are obliged by
law to return electrical and electronic devices
as well as batteries to the designated public
collection points or to the point of sale
at the end of their service lives. Detailed
information on this topic is de ned in the
national laws of the respective country.
This presence of the above symbol on the
product, operating instructions or package
indicates that the product is subject to
these regulations. By recycling, reusing
the materials or other forms of utilising
old devices/batteries, you are making an
important contribution to protecting our
environment.
max.
6