Table des Matières
Publicité
EN
TECHNICAL DATA
Product name
Model
RC-
RC-
RC-
BC001
BC009
BC008
Power supply [V]/
Frequency [Hz]
Rated power [W]
175
220
135
Capacity [L]
208
318
108
Refrigerant
R600a/
R600a/
R600a/
50g
80g
35g
Power consumption
1,15
1,37
1,05
[kWh/24h]
Temperature [°C]
Dimensions
900 x
1335 x
500 x
(L x W x H) [mm]
500 x
500 x
500 x
840
840
840
Number of shelves
4
6
2
Maximum load per shelf [kg]
Sliding door
YES
YES
x
Hinged door
x
x
YES
Lock
YES
YES
YES
Double glazing
YES
YES
YES
Adjustable leg height
YES
YES
YES
Weight [kg]
62
70
32
SCOPE OF THE APPLICATION
The beverage fridge is intended for household use, offices, bars, restaurants, hotels, etc. This appliance is not
intended to store food or drinks without the package.
The user is liable for any damage resulting from non-intended use of the device!
BERORE THE FIRST USE
Upon receipt of the goods, check the packaging for defects and open the packaging if there are no damages.
If the packaging is damaged, please contact your transport company and distributor within 3 days, and
document the damages as detailed as possible. Do not turn the package upside down! When transporting
the package, please ensure that it is kept horizontal and stable.
DISPOSING OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition!
INSTALLING THE APPLIANCE
POSITIONING THE MACHINE
The machine should be positioned on a dry and stable surface, vertically so as to prevent movement during
operation. The machine should be positioned on a flat, level surface, with sufficient load capacity for the
machine and its contents. Ensure unobstructed access to the electricity plug at all times. Make sure the
power source reflects the parameters on the rating plate! Prior to first use remove and wash all elements
and wash the entire machine.
34
BEVERAGE COOLER
RC-
RC-
RC-
RC-
RC-
RC-
BC007
BC006
BC005
BC004
BC003
BC002
230~ / 50
135
135
135
295
295
400
108
138
138
458
458
600
R600a/
R600a/
R600a/
R600a/
R600a/
R290a/
35g
35g
35g
85g
85g
120g
1,05
1,263
1,263
2,936
2,936
4,64
2~ + 10
500 x
600 x
600 x
900 x
900 x
1120 x
500 x
500 x
500 x
515 x
515 x
610 x
840
900
900
1840
1840
1965
2
2
2
10
10
8
30
x
x
x
x
x
x
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO/
WHEELS
31,5
38
37,5
96
104
138
Rev. 07.01.2020
MACHINE OPERATION – BASICS
Description of the device
6
5
4
1
3
2
Control panel description
2
3
1
5
4
Before using the device, unpack and assemble it. The shelves are fitted using special hooks. Remember to
install the hooks in such a way that the shelves rested on them evenly and steadily. After installing the shelves,
clean the device thoroughly.
NOTE: Before putting any foodstuffs into the fridge, turn it on, close it and let it run empty for an hour.
Using the device
In order to select the correct temperature, press and hold the Set button for about 5 seconds; when the
display shows „Se", press the Set button again. Next, use the buttons marked as 3 and 4 in the photo to
choose the desired temperature. In order to exit the temperature setting mode, press the button marked as
5 in the photo, or wait about 30 seconds for the device to automatically return to the current temperature
display. The device maintains the pre-set temperature automatically.
In order to defrost the fridge, hold the button marked with 5 for about 3 seconds. The display will show
the symbol „def" and letters „De". In order to stop defrosting, once again hold the button marked as 5 for
about 3 seconds until the "def" symbol disappears and the display shows the current temperature. You can
also defrost the fridge by unplugging it from the power source. The fridge defrosts automatically. Condensed
water precipitates into a special tray located on the compressor and evaporates.
Rev. 07.01.2020
EN
1.
Adjustable height shelves
2.
Temperature regulator
3.
Lock, the exact location depends on the mode
4.
Door opening handle (depending on the model the
door can be sliding or hinged)
5.
Slats holding the shelves
6.
Backlit banner (for RC-BC002)
1.
LED display
The display shows the temperature
and individual functions of the
device
2.
Set
Used to set temperature
Parameter adjustment
3.
Light, temperature up
Used to turn the illumination
on/off
Used to pre-set the temperature
4.
Temperature down
Used to reduce the temperature
5.
Back/exit
Used to leave the setup mode
Hold to defrost
35
Publicité
Table des Matières
