Welcome To Toshiba; Function Status Indicators - Toshiba 44HM85 Manuel D'utilisation

Welcome to Toshiba

Welcome to Toshiba
Congratulations! You have purchased one of the finest DLP
guide you through setting up and operating your Toshiba TV as quickly as possible.
This manual applies to models 44HM85. The model and serial numbers are on the back of your TV. Write these numbers in
the space provided on the front cover of this manual for your records.
Instructions in this manual are based on using the remote control. You can also use the controls on the TV if they have
the same name as those on the remote control.
Please read all the safety and operating instructions carefully, and keep the manual for future reference.

Function Status Indicators

Lamp indicator, operation indicator, and temperature indicator located below the front panel controls,
reveal the operating status of the DLP projection TV.
Operation Indicator
Lamp Indicator
Temperature Indicator
TM projection TVs on the market. The goal of this manual is to
Operation Indicator
Lamp Indicator
Off Power cord is not connected.
Red Power Cord is connected, unit is on standby mode.
Green TV turns on.
Orange (flashing) Preparing operation in standby mode.
Red (flashing) There is a problem with the lamp or around it. Contact an
authorized service center.
Red Lamp life over.
Green (flashing) The lamp cover is not closed.
Red The projection TV has shut down due to overheating.
After viewing the phrase "Thermal High Error".
Red (flashing) The projection TV shut down due to the cooling fan trouble.
Contact an authorized service center.
Orange Thermal warning.
Temperature Indicator
P A G E 7