Vcr Connections - Toshiba 44HM85 Manuel D'utilisation

VCR Connections

Locate the Antenna jack on the
1
back of your TV. Connect this to
RF out jack on the back of your
VCR.
Or, find the composite video and
audio jacks on the back of your
VCR, and connect them following
the instructions provided with
your equipment.
You may connect either the com-
posite video or the S-Video cables
to your TV. (Do not connect both
the composite and the S-Video
cables. In the event that you con-
nect both composite and the S-
Video cables, only the S-Video will
work.)
W To hear stereo sound from cable or your VCR,
you will need to connect A/V cables as well as
the wire that runs from the VCR to your TV.
If you want to receive your signals on Channel
W
3 or 4, locate the Out to TV jack on your VCR.
Connect a cable from the Out to TV jack to the
Antenna In jack on the back of your TV.
P A G E 1 2
Cable TV
Wall Jack Panel
Round Wire
(75 ohm)
RF Coaxial Wire
(75 ohm)
Back AV Panel
Output In
Switch
3 4
Out
S-Video
Audio
Video
R
L
VCR
The unauthorized recording, use distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
Antenna
MONITOR
OUT
A/V cables
not included
with TV
VIDEO 2 VIDEO 1
INPUT INPUT
S-VIDEO
VIDEO
MONO
(L)
AUDIO
(R)