Pop - Toshiba 44HM85 Manuel D'utilisation

PIP (Picture-in-Picture) / Twin Picture Operation
Selecting PIP / Twin Picture Channels
Press the PIP button on the remote control to select PIP or Twin picture mode.
1
Select the Ant/Cable source with the PIP INPUT button.
2
Use the PIPCH-/PIPCH+ button to select a channel for the sub picture.
Swapping Pictures
Press the SWAP button.
Each time you press the SWAP button, you switch the Main and Sub pictures.
Main Picture Sub Picture
Moving the Sub Picture (PIP mode only)
In the menu, select the
PIP/DW
move the sub picture to a different position on the screen.
POP (Picture-outside-Picture)
Use POP to search the pictures of all the programmed chan-
nels one-by-one on the 3 POP screen display, while the main
screen remains the current channel.
Press PIP button on the remote control
1
with the POP image on the screen to acti-
vate POP (Picture-outside-Picture) mode.
The pictures of all the programmed chan-
nels are searched with the 3 POP screen, as
shown to the right.
• Press SWAP, to enlarge the selected
channel being searched on the POP
screen to view it on the Main screen.
(It's possible to use this function in
Ant/Cable input source for Main and Sub
picture.)
2
Press the EXIT button to exit POP mode.
Run Auto Program channel search before using POP mode.
W
and then each press of the UP/DOWN/LEFT/RIGHT arrow buttons will
Win.position
Main Picture Sub Picture
P A G E 4 5