Combinations Of Cutting Attachments And Deflectors; Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl FSE 52 Notice D'emploi

20 Combinations of Cutting Attachments and Deflectors

For information on compliance with Vibration
Directive 2002/44/EC visit www.stihl.com/vib.
19.4 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
20 Combinations of Cutting
Attachments and Deflec‐
tors
20.1 STIHL FSE 52 Trimmer
Trimmer with fanwheel
The following mowing heads may be mounted
with the deflector:
STIHL AutoCut C 3-2 mowing head:
– with round, low-noise trimmer line with a
diameter of 1.6 mm or 2.0 mm
Trimmer without fanwheel
AutoCut 2-2 mowing head cannot be installed by
the user.
► Have the required mowing head installed by a
STIHL servicing dealer.
21 Spare Parts and Accesso‐
ries
21.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.

22 Disposal

22.1 Disposing of Brushcutter
Contact the local authorities or your STIHL
dealer for information on disposal.
0458-777-9621-B
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
23 EC Declaration of Con‐
formity
23.1 STIHL FSE 52 Brushcutter
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Designation: Electric brushcutter
– Manufacturer's brand: STIHL
– Series: FSE 52
– Serial number: 4816
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN 55014‑1, EN 55014‑2, EN 60335‑1 and
EN ISO 12100 taking EN 50636‑2‑91 into
account.
The measured and guaranteed sound power lev‐
els were determined according to Directive
2000/14/EC, Annex VI.
Participating notified body: VDE Prüf- u. Zertifi‐
zierungsinstitut, Merianstraße 28, 63069 Offen‐
bach, Germany
– Measured sound power level: 94 dB(A)
– Guaranteed sound power level: 96 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of manufacture, country of manufacture
and serial number are specified on the rating
plate of the brushcutter.
Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
English
29