General Controls - Changing Programme Position; Stereo And Bilingual Transmissions - Stereo/Mono Or Dual Language Broadcasts; Time Display (Analogue Only); Sound Controls - Volume, Sound Mute, Bass/Treble/Balance - Toshiba REGZA WLG66 Serie Manuel De L'utilisateur

General controls, stereo/bilingual
transmissions, time display, sound controls
Selecting programme positions
To select a programme position use the numbered
buttons on the remote control.
Programme positions can also be selected using P
P .
e
To revert to the previous programme position press
To display on-screen information i.e. programme position,
channels or stereo/mono signal, press
to cancel.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo... Press I/II to select Stereo or Mono.
O
Bilingual... Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press I/II to select Dual 1, Dual 2 or Mono.
O
The Time Display – analogue only
The time display facility allows the current (text service)
time to be seen on the television screen.
/
Press whilst watching a normal television
8 9
broadcast to see a time display from the broadcaster. It
will remain on screen for about 5 seconds.
Sound controls
Volume
+
Press j — or j to adjust the volume.
Sound Mute
Press once to turn the sound off and again to cancel.
k
All manuals and user guides at all-guides.com
and
f
.
^ ^
. Press again
i +
16
Bass, Treble and Balance
The sound controls are accessible in digital and
analogue modes, as are most of the televisions features.
In digital mode, press MENU and using Q
1
highlight TV setup then press OK.
Use S or R to select SOUND.
2
In analogue mode, press MENU and S or R to
3
select SOUND.
SOUND
Dual
Bass
Treble
Balance
WOW
Stable sound
Back Watch TV
MENU EXIT
Press Q to highlight Bass, Treble or Balance
4
and S or R to change the setting.
When connecting to a Hi-fi unit, set the Speaker
option to Off. Then select Fixed or Variable for
the Monitor (Audio) in the AV connection
menu. (See 'Input selection and AV connections'
section).
SOUND
Speaker
Bass boost
Bass boost level
MENU Back EXIT Watch TV
1/2
Dual 1
0
0
0
OK
On
2/2
Off
On
70