Do not use USB devices other than USB Flash Drives to do software upgrades using the USB Host jack.
There should be only one fi rmware upgrade fi le in USB fl ash drive for the player to properly perform an
upgrade.
Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected.
SYSTEM inFOrMaTiOn
When the fi rmware upgrade is done, check the fi rmware details by following the steps below.
When the fi rmware upgrade is done, check the fi rmware details by following the steps below.
When the fi rmware upgrade is done, check the fi rmware details by following the steps below.
1.
With the unit in Stop mode/No Disc mode, press the
MEnU button.
2.
Press the ▲▼ buttons to select Setup, then press the
EnTEr or + button.
3.
Press the ▲▼ buttons to select System, then press the
EnTEr or + button.
.
Press the ▲▼ buttons to select System information,
then press the EnTEr or + button.
You can see detailed information about the current
fi rmware.
.
Press the EnTEr button to select OK.
System Setup menu will be displayed.
FirMWarE UPgraDE nOTiFiCaTiOn
The popup menu appears when a newer version of the fi rmware is available from SAMSUNG update server than
that of the Blu-ray Disc Player, if the Blu-ray Disc Player is connected to the network and powered on.
Yes : Select this to upgrade now.
•
no : Select this if you plan to upgrade later.
•
Music
Photo
Setup
System
No disc
_
►
Language
Audio
Display
HDMI
Network
Parental
Music
Photo
Setup
System
System Information
No disc
◄
Language
Time Zone
Audio
Clock Set
Display
Power On/Off sound
HDMI
Touch Key Sound
Network
BD Data Management
Parental
System Update
Music
Photo
System Information
Setup
System Information
No disc
System
◄
S/W : XXXXXXX
Time Zone
Language
Loader : XXXXXXX
Clock Set
Audio
Region : A/1 (BD/DVD)
ESN : XXXX
Power On/Off sound
Display
Touch Key Sound
HDMI
OK
Network
BD Data Management
Parental
System Update
System Update
New Firmware is available.
Do you want to update now?
Yes
No
English _
►
: On
: On
►
:
: