3.
Closing the lock
1. Slide bar fully into the lock body.
2. Lock will automatically lock, a tone will
confirm the locking and the LED will
flash green once. After a delay of about
10 seconds, the lock will be in
monitoring mode.
The delay is so that you can park your
bicycle where the lock can't be moved
unintentionally.
3. If the lock does not lock, a warning
tone will sound and the LED will flash
orange once.
After 6 failed attempts to lock, the lock
will stay unlocked. Check whether there
is dirt in the opening for the bar. Do
not press the bar with too much force.
Otherwise the lock will jam.
32
4.
Opening the lock
1. Authorised smartphone with
functioning SmartX App, Bluetooth®
and location services enabled or
authorised transmitter within range
(approx. 2-5 m).
2. Move the lock to unlock it. A tone will
sound to confirm the unlocking.
The LED will light up red for about
10 seconds while the bar is inserted.
3. To open the lock, pull out the bar
within 10 seconds. Otherwise the lock
will re-lock and monitoring will re-
activate. The LED will flash green once
to confirm the locking.
33