Cleaning And Maintenance - Inventum AKD9015GTZ Manuel D'utilisation

3. Touch the timer button to start. The display flashes 0.
Note:
If you do not select a level within 20 seconds, the appliance will continue to operate.
4. Use the up button or the down button to select the level.
5. Touch the timer button to confirm the setting.
The display shows the set speed and a flashing dot.
6. Touch the timer button again to cancel the mode.
USING THE REFRESH CONTROL FUNCTION
1. Touch and hold the up button for 5 seconds to activate the refresh control function.
The refresh control function now works for 24 hours.
USING THE LAMPS
1. Touch the lamp button to activate or deactivate the lamps.
2. Hold the lamp button to dim the lamps.
STOPPING THE APPLIANCE
Note:
Make sure that the appliance operates for 5 to 10 minutes after you finish cooking.
1. Touch the decrease button to stop the appliance.
The display goes off after a 20 seconds.
6

Cleaning and maintenance

SAFETY INSTRUCTIONS FOR CLEANING AND MAINTENANCE
Warning:
Clean the appliance and the grease filters regularly. Failure to do so may result in fire.
Caution:
Make sure that the appliance is off and that the mains plug is removed from the mains socket.
Caution:
Do not use abrasive cleaning agents or cleaning agents that contain alcohol.
CLEANING THE APPLIANCE
1. Clean the inside and the outside of the appliance. Use hot water and a mild cleaning agent.
2. Clean the control panel of the appliance. Use a damp cloth.
CLEANING THE GREASE FILTER
Note:
The grease filter must be cleaned when the display shows F (after 220 hours of operation).
34 • English