LG DLEX4270 Serie Mode D'emploi page 40

40
hOW TO uSE
Laundry Stats (run Cycle Again) using Lg Smart Laundry&DW application
1. Select 'Dryer Diary' on the
Laundry Stats screen.
- Select 'Dryer Diary' at the
bottom of the Laundry Stats
screen.
- The Dryer Diary display a
chart showing the last 10
cycles used.
- Details of the Most Used
Cycle and the Most Recent
cycle will also be displayed.
2. Select the 'Run Cycle Again'
button.
- The Most Used cycle or
Most Recent cycle can be
immediately started by
selecting the 'Run Cycle Again'
button.
3. Touch the Tag On logo.
- When a Tag On screen
appears(shown at right), tap
your smart phone on the Tag
On icon on the right side of
the dryer's control panel.
- If the phone isn't recognized,
touch [ ] on the upper
right of the Tag On screen on
your 'LG Smart Laundry&DW'
application to see the
detailed guide. (This might
happen due to the different
NFC antenna positions for
each phone.)
MFL67731036_en_140822.indd 40
4. Check whether washing
starts with the selected cycle.
- The screen shown at right
appears and Drying starts
immediately on the selected
cycle.
※ Images are for reference only. The actual LG Smart
Laundry&DW application may be different.
2014.8.22 2:57:12 PM