Watts Water Technologies BT Série Guide D'installation Rapide page 12

You will be directly invited to adjust with (-) or (+) the hour of the comeback step.
Press (OK) to validate and go to the following step.
You are again invited to choose the type of the next step of the program (blinking icons),
2 choices will be possible:
st
- 1 choice is to choose the sleep icons. (End of the day)
nd
- 2 choice is to choose the leaving icons, to add another step to the program during the day.
When the choice is made, press (OK) to valid and you can adjust the hour of this step with (-) or (+),
Press (OK) to validate and finish the edition of the first day.
Now you can choose to copy the program day just created to subsequent days.
Change the choice "Yes" or "no" with (-) or (+) and validate your choice with (OK).
- If you select "no", you will be invited to create a program for Tuesday (repeat the previous method to built it.)
- If you select "Yes", you will have the possibility to copy the program to the following day (on Tuesday on Wednesday...
up to the last day of the week
(7 Sunday).
When you press (OK) on the last day (7 Sunday) you will be invited to "SAVE" your program.
Then the message "Save" and blinking green LED appears:
Press (OK) key to save your program and return to AUTO operating mode following your user program.
Press the escape key ( ) to erase your user program changes and come back to operating mode.
12