Prompt Set Tm Pool Set-Up Instructions; Site Selection - POOL Prompt Set Manuel D'instructions

TM
PROMPT SET POOL -

1. SITE SELECTION

It is absolutely essential to select a suitable site for your pool BEFORE
attempting to fill it with any water. In order to ensure easy of set-up and enjoy
hassle-free use of your new Prompt Set Pool. Please select a set-up site which
strictly
conforms to the following guidelines:
A. Ensure that the area is firm, flat (no bumps or mounds of earth) and extremely
level, with a grade not exceeding 3° of slope at any point in the set-up area.
WARNING: Pools installed on inadequately level surfaces are subject to
leaking, forming irregularities, or collapse, which can result in property damage
or serious injury for those in or around the pool area! NEVER use sand or any
other leveling agent underneath the pool!
B. Make sure that the area you have selected to set-up the pool is completely free of
sticks, stones, sharp objects or other foreign debris.
C. Select an area that is not directly underneath overhead power lines or trees.
Additionally, make sure that the pool set-up area does not contain underground
utility pipes, lines, or cables or any kind. CAUTION: The pool must be
accessible to a 110 or 230-volt AC outlet protected by a Ground Fault Circuit
Interrupter (GFCI). The pool should be set no closer than 10 ft. to the power
source, but no further than the length of the filter pump cord. Under no
circumstances should an extension cord be used to extend the range of the
connection.
D. If a ground cloth is provided with your pool kit, its use is highly recommended.
The ground cloth will help protect the pool liner from damage due to weed
growth, sharp objects, and debris. CAUTION: Please choose your set-up area
carefully, as lawn and other desirable vegetation underneath the ground cloth
will die. Furthermore, try to avoid setting the ground cloth in areas prone to
aggressive plant and weed species, as they may grow through the ground cloth.
E. If at all possible, choose an open location on your property that is exposed to
SET-UP INSTRUCTIONS
6