Safety Rules; Tools Required For Assembly - POOL Prompt Set Manuel D'instructions

INSPECTION
Inspect upon receipt and before each use; never climb on a damaged, bent or broken
ladder. All ladder parts must be maintained in safe working condition.
Make sure all rivets, joints, nuts and bolts are tight and that steps, rungs, and braces
are secure.
Keep ladder clean, free from grease, oil, mud, snow, wet paint and all slippery
materials. Remove shoes and leather soles which may make it more slippery to climb
the ladder.
Never make temporary repairs of damaged or missing parts.
Destroy ladder if broken, worn, or if exposed to fire or chemical corrosion.
PROPER STORAGE
Store ladder in safe and dry place.
Never store any materials on ladder.
Keep ladder clean and free of all foreign materials.
Before using this item, please read carefully the details of this manual for assembling
and safety rules.

SAFETY RULES

You must place ladder on level, firm ground.
Only allow one person on the ladder at a time.
The ladder MUST be installed per manufacturer's instructions.
DANGER: No diving from ladder. No jumping from ladder.
Face the ladder when entering or exiting pool.
To prevent drowning – do not swim through, behind or around ladder.
Ladder to be used only with the specific Prompt Set Pool with which it was sold.
The maximum weight load of this ladder is 300 lbs.

TOOLS REQUIRED FOR ASSEMBLY

Screwdriver
CAUTION: If you use an electric screwdriver, please be careful not to touch water
while assembling.
10