2. Channel
This menu consists of 4 sub-menus:
Manual Scan, Channel List, Favorite Channel and
Parental Guide.
Select "Channel" in the main menu by using / keys.
●
●
Place the cursor on this sub menu and press the
OK key.
2.1 Manual Scan
To tune-in new channels, the STB has been provided with
"Manual Scan" where the channel data can be entered by
the user.
After selecting the "Manual Scan" from the Channel
Menu, the following screen will be displayed:
●
Input the frequency of the channel you want to find.
The followings are defined as a default, but optionally you
can choose it.
Signal Status bar shows you if it is valid.
●
Input the frequency of the channel you want to find.
●
Input the Network Id of the channel you want to find.
●
Press the OK key start scanning.
●
Select the Modulation of the channel you want to find.
You can select the value of 16, 32, 64, 128, 256.
●
Input the symbol rate of channel you want to find.
●
After select option, press OK key to start the scan
process.
OPERATING THE RECEIVER
GB-16
D
I
G
I
T
A
L
C
A
B