GB
Instructions for use MT 208, ST 208/308, STE 111
General
Designated use:
Intended purpose:
Workplace light - workplace lights
are lights intended to illuminate a
single workplace and are used in
addition to a general lighting equip-
ment.
Place of use:
Exclusively for dry rooms not sub-
ject to explosion hazards.
Operating mode:
The light is designed for continu-
ous operation.
8
Safety instructions:
The light may only be operated in
dry rooms not subject to explo-
sion hazards..
For lights of international pro-
tection class I, the protective
earth conductor must be connect-
ed to the light casing. In case of
non-observance: Risk of electric
shock!
When using the desk stands, the
lights may be rotated out of their
center position only be about 15 °.
Otherwise, there is a risk of top-
pling!
The manufacturer cannot be held liable for damage caused
by using the unit for purposes contrary to the designated use
or by ignoring safety instructions and warnings.
Abbreviations and symbols:
Attention, take note of the
accompanying documents!
Protective earth terminal
(unit of protection class I)
Light for mounting to/on
normally inflammable or
hardly inflammable
building materials
Waldmann
V
VDE Approval
D E
CE
Conformity mark