Downloading Images And Animations - JVC EXAD KD-LHX601 Manuel D'instructions

Downloading images and
animations
Before starting the following procedure, prepare a
CD-R including still images (pictures) and
animations (movies).
• The supplied Image Converter CD-ROM
includes sample images and animations, so
you can use this disc for your first trial.
IMPORTANT:
• Still images (pictures) should have <jml>, and
animations (movies) should have <jma> as
their extension code in their file names.
• Downloading a file can be done only while
selecting "CD" as the source; on the other
hand, deleting a file can be done while
selecting any source.
• Before you download or erase the files,
observe the following:
– Do not download a file while driving.
– Do not turn off the ignition key of the car
while downloading or erasing a file.*
– Do not detach the control panel while
downloading or erasing a file.*
* If you do it, the file download and erasure
will not be done correctly. In this case,
perform the same procedure again.
• If you have already downloaded an
animation for "Opening," "Ending," or "Movie,"
downloading a new animation deletes the
previously stored animation.
• It takes a long time for the unit to download
an animation.
– About 6 to 7 seconds for a still image (one
frame).
– About 3 to 4 minutes for an animation of
30 frames.
– About 10 minutes for an animation of 90
frames.
• While a station or service is being tuned in
by one of the Standby Reception modes
such as TA or PTY, you cannot download or
delete a file. On the other hand, while you
are downloading or deleting a file, Standby
Reception mode will not work to have this
unit tune in a station or service. It only works
after download or deletion is over.
46
1
Open the control panel.
2
Insert a CD-R with the files (images
and animations you made with
Image Converter) into the loading
slot.
• If the disc includes playable audio files
such as MP3 tracks, playback starts
automatically.
3
Press M (MODE) after the disc is
detected.
"Mode" appears on the display.
The next-step-operation buttons
start flashing.
4
Press number button 6 to show the
download selection screen.
5
Select (highlight) one of the listed
items for which you want to
download a file.
The unit draws the disc,
the control panel goes
back to the previous
position (see page 61).