MSI Optix MAG27CQ Mode D'emploi page 3

I.Safety Prevention Measures
Please always place
this device on a stable
surface; otherwise,
i t m a y f a l l a n d b e
damaged.
When cleaning the
device, be sure to
remove the power
p l u g , u s e a p i e c e
of soft cloth rather
t h a n i n d u s t r i a l
chemical to clean
the device, be sure
not to let water enter
the device.
Note:
The device with AC switch may use such AC switch as cut-off component.
The device without AC switch may use power plug or coupler as cut-off component.
In case of the normal use of the equipment, make sure the cut-off component
can be accessed easily.
The altitude and the
tropical environment
the adapter fits depend
on which adapter is
used for the device.
The rating plate on
the back of the device
with the above warning
sign indicates that
t h i s p r o d u c t i s
applicable for the
safe use of the region
w i t h a l t i t u d e o f
2,000m and below.
Do not disassemble
this device without
permission. In case
of failure, be sure to
contact a professional
servicing person to
fix it. The unauthorized
disassembly of this
device may result in
electric shock or fire.
All specifications and informations are subject to change without notice.
Do not hold the plug
w i t h w e t h a n d ;
otherwise, electric
s h o c k m a y o c c u r.
Make sure the plug
h a s a g o o d t o u c h
because poor touch
may cause fire.
In case of rare smell
or noise out of this
device, be sure to
immediately cut off
the power supply and
ask a professional
servicing person to
fix the problem.
-1-
Do not use a broken
power plug nor keep
a power cord near heat
source; otherwise,
e l e c t r i c s h o c k o r
fire may occur.
W h e n t h i s d e v i c e
is idle for long time,
be sure to power it
off; otherwise, electric
s h o c k o r f i r e m a y
occur.