ProBreeze PB-H06 Mode D'emploi page 6

Modes
1.
Press the Mode button once to select LOW power.
2. Press the Mode button twice to select MEDIUM power.
3. Press the Mode button three times to select HIGH power.
4. Press the Mode button four times to select ECO mode.
ECO Mode: Allows you to set a desired room temperature. Once the desired tempera-
ture has been reached, power will reduce to save energy. Temperature will default to
23°C if not set manually in ECO mode.
Notes: The higher the power setting, the faster the desired temperature will be reached
but the higher the power consumption.
For long-term use, it is recommended to use the Low power setting to reduce power
consumption.
Thermostat Function
The thermostat function can only be used whilst in ECO mode. The available
temperature range is 10°C to 30°C. To set the thermostat:
1. Ensure ECO mode has been selected.
2. Press the Thermostat button. The temperature digits (°C) will blink.
3. Use the "+'' and "-'' buttons to set the desired temperature. The temperature digits
will stop blinking and show the current room temperature.
4. The heater will adjust the power level automatically to achieve the set temperature.
Note: Once the set temperature is reached the heater will turn off automatically. Similarly,
once the room temperature falls beneath the set temperature the heater will turn on
automatically and work to achieve the set temperature.
Timer Functions
The heater can be set to turn ON and OFF at the time you want.
5 | English