Hoover SMARTWASH+ FH53000PC Mode D'emploi page 16

Maintenance
How to Change and Clean Brushes
HOW TO REMOVE
1
To prevent possible
leaking, remove Clean
Water Tank, Dirty Water
Tank and Solution Tank.
2
With handle in upright
position, follow "Nozzle:
How to Remove and
Clean" instructions.
STORAGE
Before storing: Empty Clean Water Tank and
let air dry. Replace on cleaner. Empty Dirty
Water Tank, rinse tank and lid thoroughly
with clean water and let air dry. Empty
Solution Tank, rinse tank with clean water.
16
Allow brushes and underside of carpet
cleaner to air dry thoroughly before storing
carpet cleaner on a carpeted or wood
surface.
3
Grab Side A and pull up
to remove. Repeat on the
A
other brush.
4
The brushes can be
cleaned under running
water.
LUBRICATION
The motor is equipped with bearings that contain
sufficient lubrication for the life of the motor.
The addition of lubricant could cause damage.
Therefore, do not add lubricant to motor bearings or
brushrolls.
HOW TO REPLACE
1
At an angle, align side
B on the brush to the
drive gear.
2
Press Tab A down until
brush snaps in place.
A
CAUTION
To reduce the risk of injury from moving
parts, unplug before servicing.
B