Giropes Baxtran BR95 Mode D'emploi page 42

W4
LF3
SPEED OF THE AD CONVERTER
SPEED 1 standard speed 15Hz.
SPEED 2 high speed 30Hz.
SPEED 3 low speed 7.5Hz
*This function stays blocked when UF-5 is in mode HOLD 1.
*The value of factory is 1
DISPLAY
LF4
SPEED 1
LF 4
BLINF
LF 5
DISPLAY
LF 5
DISPLAY
LF 5
42
•Press the key to complete the lineal calibration. (press the key
tion and go back to the menu LF3)
•Use the keys ,
the key to exit from the menu and the scale will begin again automatically.
LF 4
DESCRIPTION AND SEQUENCE OF USE
•Press the key to start or the key
again automatically.
•Use the key and then the key
to exit from the configuration and go back to the menu LF4)
•Use the keys ,
to exit from the menu and the scale will start again automatically.
DESCRIPTION AND SEQUENCE OF USE
ZP 0 OFF
ZP 1 One division will not show being at zero
ZP 2 Two division will not show being at zero
ZP 3 Three divisions will not show being at zero
ZP 4 Four divisions will not show being at zero
ZP 5 Five divisions will not show being at zero
*This function is going to be blocked when UF-5 is in mode HOLD 1
*The value of factory is ZP 0
DESCRIPTION AND SEQUENCE OF USE
• Press the key to start or the key
automatically.
and then the key to continue with other adjustments and press
to exit from the menu and the scale is going to begin
to select the speed of the AD converter ( press the key
and then to continue with the other adjustment and press the key
to exit from the menu and the scale will start again
USER'S MANUAL BR95
to exit from the calibra-
EN