Materials Of Construction - Parker BAM10 Mode D'emploi

2.3 Materials of Construction

Skid base
Filter Support Frame
Inlet and Outlet Connections
Silencer Baffle and End Cap
Columns, Manifolds and Valve Blocks
Manifold and Purge End Plates
Inlet, Outlet and Exhaust Valve Block End Plates
Inlet and Exhaust Cylinders
Dryer Feet
Rear Mounting Plate
Coalescing Filter
Hygrometer Housing
Fittings
Pressure Gauge
Adsorbant
Seal Materials
Paint
150 x 75 x 18mm BS4 Parallel Flange channel
5mm Mild Steel Plate
50x50x6mm Equal Angle (BS4 and BSEN10056)
316 Steel
Aluminium
Aluminium Extrusion EN AW-6063 T6
Cast Machined EN AW-6082 T6
Cast Machined EN AC-44100-F
Aluminium Alloy
8MM Steel Plate
14SWG Mild Steel
Aluminium Housing
GR316 – BS970
Nickel Plated Brass and Nickle Plated Mild Steel
ABS Plastic casing and dial, brass connector and movement
Activated Alumina and 13X MS
Nitrile, Viton, EPDM, PTFE (tape)
Epoxy coated
5