Teaching-In To The Wall Thermostat; Teaching Out Wireless Components - Lemona eQ-3 Mode D'emploi

13. Teaching-in to the wall thermostat

Up to 5 system components such as remote controls,
window contacts or additional outdoor temperature
sensors can be taught-in to the wall thermostat.
To do this, press and hold down the OK button for long-
•
er than 3 seconds.
• "LEA" and the remaining teach-in time (30 seconds)
appear on the display.
The device to be taught-in now needs to transmit a ra-
•
dio signal (by pressing a button on a remote control,
for example).
Once teaching-in has been completed successfully, a
•
code for the taught-in device appears on the wall ther-
mostat's display for 3 seconds: rC – remote control, SC
– window contact, Ot – outdoor temperature sensor.
The display then returns to the standard view.
•
If 5 devices have already been taught-in to the wall
thermostat, "Err" appears on the display. In this case,
one of the taught-in devices needs to be taught-out before
a new device can be taught-in (see section 14).

14. Teaching out wireless components

Components that have been taught in on the actuator
can be taught out again using the "UnL" (Unlearn) func-
tion. All wireless components are taught out at once with
this function.
Press and hold down the mode button for more than
•
3 seconds.
Use the setting wheel to select the "UnL" menu item.
•
• Confirm with OK.
"ACC" will appear on the display; press OK to confirm.
•
29