Mounting Of Wall Thermostat - Lemona eQ-3 Mode D'emploi

Use the setting wheel (D) to set
•
the month (B).
Confirm with OK (C).
•
Use the setting wheel (D) to set
•
the day (B).
• Confirm with OK (C).
Use the setting wheel (D) to set
•
the hour (A).
Confirm with OK (C).
•
• Use the setting wheel (D) to set
the minute (A).
Confirm with OK (C).
•
After setting time and date the dis-
play will then switch to normal view.

5. Mounting of wall thermostat

The wall thermostat must be mounted in the same room
as the devices, such as radio energy-saving controllers,
window contacts or remote controls, that have been
taught-in to it.
• First of all, find an appropriate mounting location, ma-
king sure that no electricity or similar lines run there.
Use a pen to mark the bore hole positions (a) of the
•
wall mount on the wall.
• If you are working with a stone wall, you should drill
the holes using a
5 mm drill. Then insert a plug into each of the drilled
holes.
• If you are working with a wooden
wall, you should drill the marked
holes (a) using a 1.5 mm drill.
• Now use screws to fix the wall mount
to the wall.
A B
C D
a a
23