Setting The Weekly Program - Lemona eQ-3 Mode D'emploi

ton to confirm your choice. Press the mode button again
to return to the previous level. After 60 seconds without
anything happening, the menu will close automatically.
The weekly program allows you to set up to 3 separate hea-
ting periods (7 switching times) for each day of the week.
Programming is performed in relation to the selected days,
for which temperatures must be stored for a period from
00:00 to 23:59.
Press and hold down the mode
•
button for more than 3 se-
conds.
• "Pro" will appear on the display.
Confirm with OK.
•
"dAy" will appear on the display.
•
• The setting wheel can be used to select an individual day
of the week, all working days, the weekend or the entire
week (example shows working days selected).
Confirm with OK.
•
• Use the setting wheel to set the first time segment
(example shows 0:00 to 6:00).
Confirm with OK.
•
Then, select the required temperature for the selected
•
time segment (example shows 17.0°C).
• Confirm with OK.
Keep repeating this process until you have finished storing
•
temperatures for the period from 0:00 to 23:59.
In Auto mode, the set weekly program is adopted by the
taught-in radio energy-saving controllers automatically
and the temperature can be modified at any time via the
setting wheel. The modified temperature will then be re-
tained until the next program changeover.

8. Setting the weekly program

25