Safety And International Symbols - MTD Yard Machines MTD1435a Manuel D'utilisation

For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983

SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning, or cau-
tion. May be used in conjunction
with other symbols or pictographs.
• WARNING - READ OPERATOR'S
MANUAL
Read the Operator's Manual(s) and
follow all warnings and safety
instructions. Failure to do so can
result in serious injury to the opera-
tor and/or bystanders.
• WEAR EYE, HEARING AND
HARDHAT PROTECTION
WARNING : Thrown objects and
loud noise can cause severe eye
injury and hearing loss. Wear eye
protection meeting ANSI Z87.1-
1989 standards and ear protection
when
operating this unit. Wear a hard hat.
Use a full face shield when needed.
• UNLEADED FUEL
Always use clean, fresh unleaded
fuel.
• OIL
Refer to operator's manual for the
proper type of oil.
RULES FOR SAFE OPERATION
www.mymowerparts.com www.mymowerparts.com
SYMBOL MEANING
• ON/OFF CONTROL
ON / START / RUN
• ON/OFF CONTROL
OFF OR STOP
•
Contact of the guide bar tip with any
object should be avoided. Tip con-
tact may cause the guide bar to
move suddenly upward and back-
ward, which may cause serious
injury.
• USE BOTH HANDS
Always use both hands while oper-
ating the chain saw. Never use only
one hand to operate the saw.
Avoid bar nose contact.
This product has been tested at a
computed kickback angle (CKA) of
no greater than 45 degrees.
6
WARNING :
GUIDE BAR