pclocs Lockncharge Carrier 30 Cart Mode D'emploi page 4

Carrier 30 Cart and Carrier 40 Cart
Insert all the device adaptors into the power
strips.
Press a finger into the Gripweld to create
a pull-hole.
Insert the remaining cables.
Evenly space the cables along the Gripweld.
Replace the Carry Baskets with the devices
installed.
Run the cable up through the hole at the end.
Pull the cable through the Gripweld.
Slide the cable along adjacent to the device.
Replace the shelves.
Small devices level.
Large devices level.
NOTE: There are 3 positions the shelves can be
inserted. Insert the shelves at the height that suits
your devices.
For smaller devices choose the highest position.
For large devices choose the lowest position.