Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN OPERATION
FILLING THE SALT RESERVOIR
Fill the salt reservoir with salt whenever the add
salt indicator is displayed. Use standard water
softener salt pellets (solar or evaporated).
Do not use rock salt to fill the salt reservoir.
1. Remove the cover from the salt reservoir.
2. Pour the bag of salt into the salt reservoir. Fill
the salt reservoir to approximately 50mm
(2inches) below the salt reservoir opening.
3. Reinstall the cover onto the salt reservoir.
14
MAINTENANCE
4. Press the reset touch button and allow the
system to generate solution. The pump will
operate at a high rate while generating
solution. Multiple resets may be required
before the condition is cleared.
OS3 DM20036 (3−2014)
Publicité
Chapitres
Table des Matières
Dépannage
