Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
Set the steam control to position O.
2
Fill the water tank to the maximum level.
Do not pour vinegar or other descaling agents into the water tank..
C
3
Set the temperature dial to MAX.
4
Put the plug in the wall socket.
5
Unplug the iron when the amber pilot light has gone out.
6
Hold the iron over the sink and set the steam control to
position 1 (Calc-Clean).The steam control knob will spring up
slightly.
C
7
Pull the steam control knob upwards to remove the steam
control needle.
C
8
Move the iron to and fro.
Steam and boiling water will come out of the soleplate. Impurities and
B
scale (if any) will be flushed out.
C
9
Use vinegar to remove scale, if any, from the needle.
Do not bend or damage the steam control needle.
C
10
Put the steam control needle back by inserting the point of the
needle exactly in the centre of the hole and by fitting the small
projection on the side of the needle into the slot. Set the
steam control knob to position O.
11
Repeat the Calc-Clean process if the iron still contains a lot of
impurities.
ENGLISH
9
Publicité
Table des Matières
