Using The Appliance - Philips Mistral GC2225 Mode D'emploi

ENGLISH
6
For versions with auto shut-off (types GC2225 and
GC2130 only) (see also 'Other features')
C
If the automatic shut-off function has been activated (red pilot
light blinks), move the iron slightly to deactivate this function (red
pilot light stops blinking).

Using the appliance

Steam ironing
Make sure that there is enough water in the water tank.
1 Set the temperature dial to the recommended position.
See 'Setting the temperature'.
C
2 Set the steam control to the appropriate steam position.
- Á for minimum steam (temperature settings 2 and 3).
- Ëfor moderate steam (temperature settings 3 to MAX)
(Types GC2225, GC2220, GC2215, GC2130, GC2126, GC2125
and GC2120 only).
- Èfor maximum steam (temperature settings 3 to MAX).
Steaming will start as soon as the set temperature has been reached.
B
Types GC2215, GC2120, GC2115, GC2110 and GC2105
only
Water may leak from the soleplate if the set temperature is too low
(MIN to 2).
GC2225, GC2220, G2130, GC2126 and GC2125 only.
The iron is equipped with a drip stop system (see also 'Other
features).
Ironing without steam
1 Set the steam control to position O (= no steam).
2 Set the temperature dial to the recommended position.
See 'Setting the temperature'.