Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6
Installation Options
This unit is designed with some unique features that allow for maximum installation flexibility.
EN
1.
The gas supply to the enclosure can come either from underneath or through the side of the enclosure.
The gas supply is shown entering
the side of the enclosure.
If the gas supply is to be routed through the side of the enclosure remove the (3) screws from the cover
plate so the hole is exposed. Snap the bushing into the side panel to secure the hose in place. Slide the
cover plate over, and reinstall.
The gas supply is shown entering
the bottom of the enclosure.
2. The burner unit can be used either with or without the enclosure. Simply lift the unit out of the
enclosure to separate. A second person is required to guide out the gas hose /regulator when
removing the burner unit from the enclosure. The burner unit can be placed directly on combustible
surfaces, but the required clearances to the sides and top must still be maintained.
Two people are required to lift burner unit from enclosure
Lift burner unit from enclsoure using handles
www.napoleongrills.com
Ensure
bushing
snaps into
side panel
as shown.
Publicité
Table des Matières
