Connecting Devices And Powering The Ac Unit - Tripp-Lite CSCXS36AC Manuel Du Propriétaire

4. Setup

4.4 Connecting Devices and Powering the AC Unit

Your charging station contains three baskets
on the AC charger unit , then run the device cable and connector through a device slot
B
Notes: Baskets are removable for easier power brick installation. If using fewer than 36 devices, you can adjust the number of shelf dividers for a particular shelf and
zone. For more information, refer to 4.3 Adjusting Storage Shelf Dividers.
A
Plug and outlet type will vary by model.
. To connect the device power bricks, place the bricks in the basket. Plug the power brick into an outlet
A
6
. Repeat as needed for each device.
C
Devices 1-12
B
Plug and outlet type will vary by model.
Devices 13-24
Devices 25-36
C