Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7. 16-Port USB Charger/Hub
7.1 USB Charger/Hub Features
• Professional-grade USB charger/hub charges and syncs up to 16 USB devices, including iPads
and smartphones.
• Provides each USB port with an optimum charge level for a particular device (up to 2.4 amps).
• Allows syncing to be performed with any device designed for USB data communications, per compatible file management software.
• Syncs Apple
devices via iTunes
®
• Mini-USB Firmware Upgrade Port enables future software upgrades to support newer devices.
• 1U, rack-mountable housing can be configured for professional, educational or personal installations.
• IEC C14 inlet makes power connections easy, regardless of region or voltage requirement.
D
C
A
2.4A USB Device Ports with LED Indicator Lights (16 total)
B
Computer Sync Port
C
Firmware Upgrade Port
D
Mounting Ears (Detachable)
7.2 Connecting Devices to the USB Charger/Hub
Each storage shelf features 16 strain relief bushings that prevent the USB cable's device
connectors from slipping through the bushing
shielded USB cable, connect the USB cable to the device to be charged. Then pass the cable end
through the strain relief bushing on the storage shelf and connect the USB connector into a USB
charging port
. Repeat for all devices.
B
Tripp Lite offers individual and 10-pack cables for Apple
Lightning™ cables, as well as individual and 10-pack cables for USB 3.0 or 2.0 devices using USB
A (male) to 5-Pin Micro B (male) cables.
Cable Type
Apple USB to 30-Pin Connector, 10"
Apple USB to 8-Pin Lightning Connector, 10"
USB 3.0 SuperSpeed A (Male) to 5-Pin Micro-B (Male), 1'
USB 2.0 Reversible A (Male) to 5-Pin Micro-B (Male), 1'
* Features a reversible USB A (male) connector for simplified installations.
Visit www.tripplite.com for more information on our selection of premium USB cables.
7.3 Connecting a Computer to the USB Charger/Hub
In addition to device charging, the USB Charger/Hub is equipped with a hub function that syncs devices and their respective software applications via a
connected computer. To enable the hub function, use the included USB cable to connect the USB B connector into unit's Computer Sync Port and the
USB A connector into a computer's USB port.
Note: When a computer connection is established and multiple devices are connected to the USB Charger/Hub (Model: U280-016-RM), the charge rate will reduce during syncing and
resume to the normal charge rate upon completion.
Note: The Firmware Upgrade Port requires a mini-USB connection (cable not included).
software or Apple Configurator.
®
A
. Using a user-supplied or device manufacturer's
devices using USB to 30-Pin or USB to
®
Individual Cable
Model Number
M110-10N-BK
M100-10N-BK
U326-001-BK
UR050-001*
, iPods
®
®
A
10-Pack Cable
Model Number
M110-10N-BK-10
M100-10N-BK-10
U326-001-BK-10
UR050-001-10*
7
and iPhones
as well as Android™ tablets
®
B
A
B
D
Publicité
Chapitres
Table des Matières
