Connecting Up Monitor Console And Loudspeaker; Installing Navigation Computer; General Notes; Encoding - BMW Mark IIiL Instructions De Montage

9. Connecting up monitor console
and loudspeaker
F 36 0019 B
Relocate the cigarette lighter and switch to the
monitor console.
Plug junction A8, black 6-pin female connector on
navigation system wiring harness, to the rotary
press switch (1) in monitor console (2).
Plug junction A14, white 12-pin female connector
on navigation system wiring harness, to the
monitor (3) in monitor console (2).
Carefully insert the monitor console (2) into the
function carrier.
F 36 0020 B
Plug junctions A6 and A7 according to size onto
the loudspeaker (1).

10. Installing navigation computer

F 36 0017 B
Plug junctions A1 and A2 and GPS aerial
connector (1) into the navigation computer (2)
and secure with cable ties.
b
Install glove compartment and check that the
connector cables are easily accessible.

11. General notes

Reassemble removed parts in the reverse order of
removal.
Reconnect battery.
Conduct function check.
For system description, see operating instructions
provided.

12. Encoding

This system is not relevant to encoding.

13. Wiring diagram

F 36 0018 B
bl = blue
br = brown
ge = yellow
gn = green
gr = grey
rt = red
sw = black
vi = violet
ws = white
c
A1* Navigation computer
1* GPS aerial
X1* 12-pin female connector (black)
X2* GPS aerial connector
X3* 1-pin plug contact
X4* 1-pin plug contact
X5* 16-pin female connector on navigation
computer (black)
X6* 6-pin female connector on rotary press
switch (black)
X7* 12-pin female connector on monitor
(white)
X13 30-pin female connector
(with IDC termination)
X10012 Earth point on right-hand instrument
panel bracket
X18126 17-pin female radio connector (black)
Items marked with * refer only to this wiring
diagram. All other items correspond to the BMW
Service Department wiring diagrams.

14. Template

F 36 0016 B
All Ø 4.5 mm
Opening for footwell light
Cut out along outer lines!
21